|
|
Dynamic analysis of structure loaded seismic loads
Janošková, Lenka ; Nevařil, Aleš (referee) ; Vlk, Zbyněk (advisor)
In this diploma thesis the seismic load on two different models is solved – the first model is a beam hall and the second model is a multistory building. The calculation of seismic load was performed according to standard ČSN EN 1998-1 (Eurocode 8) using the response spectrum analysis and the method of equivalent static forces (substi-tute load). For the combination of seismic responses in different directions are used SRSS and CQC rules. Models and calculations were solved in a student’s version of program RFEM 4.10 (Ing. Software Dlubal, s.r.o.). The comparison of mentioned methods in each models, also the comparison of combinative rules in calculation and the final evaluation of seismic responses on both of models are the subject of this thesis.
|
|
|
Dynamic analysis of structure loaded seismic loads
Šulerová, Zdeňka ; Nevařil, Aleš (referee) ; Vlk, Zbyněk (advisor)
This thesis deals with the calculation of response of reinforced concrete construction on the effect of seismic tension. Time and spectral analysis were made. They are mentioned as possible ways of calculation in EN 1998 - 1:2004 norm. Final figures of global deformations and stress on selected beam from the time and spectral analysis were firstly compared for the horizontal components of seismic stress affecting only in one direction. Subsequently comparison of time progress to combination of these effects mentioned in relevant norm was made. In the conclusion the results of used analysis are appraised.
|
|
|
Analysis of the structure for the effects of earthquakes
Švejcar, Martin ; Martinásek, Josef (referee) ; Vlk, Zbyněk (advisor)
This master thesis deals with analysis of a selected construction subjected to a seismic load. In the Dlubal RFEM programme, a basic model was created and analyzed with the spectral analysis using response spectra and with the time analysis using accelerograms from the database of the programme. The outcomes from these analyses were compared. Subsequently, the same calculations were performed on modified models and the results of the internal forces and deformations of the structure were compared with the outputs obtained on the original basic model.
|
|
| |
|
|
Seismic Analysis of The Pump 200-QHD
Čapičík, Martin ; Chlud, Michal (referee) ; Lošák, Petr (advisor)
The main goal of this thesis is dynamic analysis of shaft of booster pump QHD-200. In the beginning we offer basic equations generally used in dynamics and common/possible methods for their solution. Then we focus on specific problems connected with rotor dynamics and using simple Laval rotor we show their mathematical interpretation. Based on given load as accelerogram we create response spectrum in different ways (using different methods) and compare their CPU time demand. In the next part we make three finite element models of different physical level. We perform modal analysis and comparison of eigen frequencies, mode shapes. In following chapter transient analysis was performed on all models. As load we use accelerogram. We evaluate translations in particular positions of model. After that, we decide whether or not gap between impeller and stator case will be erased. Finally we make assessment of force acting upon bearings.
|
|
|
Seismic Analysis of The Pump 200-QHD
Čapičík, Martin ; Chlud, Michal (referee) ; Lošák, Petr (advisor)
The main goal of this thesis is dynamic analysis of shaft of booster pump QHD-200. In the beginning we offer basic equations generally used in dynamics and common/possible methods for their solution. Then we focus on specific problems connected with rotor dynamics and using simple Laval rotor we show their mathematical interpretation. Based on given load as accelerogram we create response spectrum in different ways (using different methods) and compare their CPU time demand. In the next part we make three finite element models of different physical level. We perform modal analysis and comparison of eigen frequencies, mode shapes. In following chapter transient analysis was performed on all models. As load we use accelerogram. We evaluate translations in particular positions of model. After that, we decide whether or not gap between impeller and stator case will be erased. Finally we make assessment of force acting upon bearings.
|
|
|
Dynamic analysis of structure loaded seismic loads
Šulerová, Zdeňka ; Nevařil, Aleš (referee) ; Vlk, Zbyněk (advisor)
This thesis deals with the calculation of response of reinforced concrete construction on the effect of seismic tension. Time and spectral analysis were made. They are mentioned as possible ways of calculation in EN 1998 - 1:2004 norm. Final figures of global deformations and stress on selected beam from the time and spectral analysis were firstly compared for the horizontal components of seismic stress affecting only in one direction. Subsequently comparison of time progress to combination of these effects mentioned in relevant norm was made. In the conclusion the results of used analysis are appraised.
|
|
|
Dynamic analysis of structure loaded seismic loads
Janošková, Lenka ; Nevařil, Aleš (referee) ; Vlk, Zbyněk (advisor)
In this diploma thesis the seismic load on two different models is solved – the first model is a beam hall and the second model is a multistory building. The calculation of seismic load was performed according to standard ČSN EN 1998-1 (Eurocode 8) using the response spectrum analysis and the method of equivalent static forces (substi-tute load). For the combination of seismic responses in different directions are used SRSS and CQC rules. Models and calculations were solved in a student’s version of program RFEM 4.10 (Ing. Software Dlubal, s.r.o.). The comparison of mentioned methods in each models, also the comparison of combinative rules in calculation and the final evaluation of seismic responses on both of models are the subject of this thesis.
|
|
| |
guest ::
